How to restart an assessment 

If you need to restart an assessment follow these simple instructions

Step 1: Find the Restart button

A repetition can be restarted using the “Restart 🔁” button in the upper right corner, under the three dots during an active measurement. It’s available in ROM, JPE, and Butterfly tests.

Step 2: Press the  “Restart 🔁” button

Pressing the  “Restart 🔁”  button will start the current measurement from the beginning, without having to restart the assessment from the very beginning. You will be able to continue the assessment once the patient is ready.

Here’s an example of how the "Restart 🔁" button can be used

A patient has completed a flexion/extension round and is now performing a left/right rotation round during the ROM test. During the second left rotation repetition, the patient becomes confused and returns to the neutral position after rotating only 15° (the patient’s maximum range is closer to 60°, as shown in the first repetition). To prevent this failed repetition from being saved and skewing the average results, the left/right rotation round can be cleared and restarted using the "Restart 🔁" button. All data collected during the respective round up to and including the failed repetition will be cleared, and the left/right rotation repetitions will need to start over. The previously completed flexion/extension round will be stored and does not need to be repeated.